Installation/ Reinstallation Guide

How to install iCamPro?

Before starting the installation, please make sure you use the power adapter coming with the iCamPro.

Make sure you have downloaded "Amaryllo" APP for your iOS or Android phone/tablet.

Follow the steps below to install the device -

  1. Connect power cord to power up the device
  2. Wait for 50 seconds, until it finishes motor calibration/rotation.
  3. Check the front blue light, if it's solid, your device has already been installed. Please follow "How do I revert the device to factory default settings" in order to reset the device first.
  4. If the front blue light is blinking, it means the device is ready to be installed.
  5. Open the "Amaryllo" APP on your phone/tablet. If you haven't installed any Amaryllo devices yet, the first page will offer you to choose the installation methods. If you already have installed a device prior, go to "Add Camera" on the main toolbar to proceed to the installation of the new device.
  6. Choose the "Standard setup" as recommended, and then follow the instructions to fill in your WiFi network name (SSID) (2.4GHz only) and password, and a QR code will be generated on the screen.
  7. Place the QR code which is on your phone/tablet in front of the iCamPro (10-30 cm in front of the lens of the device), a sound will indicate that the QR code has been read by the device.
  8. The iCamPro will then try to connect to your WiFi network, and the APP will pair the device with the phone/tablet.
  9. A congratulation message on the APP will then appear which will mean that the installation of the device is done successfully. Otherwise -

If you are prompted with "wrong password" audio message, please make sure you have the correct password of the Wifi network. If you are prompted with "cannot connect to wireless network" audio message, please make sure you have the correct WiFi network name (SSID), or try to move the iCamPro closer to your WiFi access point.

How do I re-install the device if my APP on the phone is accidentally removed?

If you ever installed this device on other phone/tablet, you can transfer the administrative privilege from other phone/tablet by using the administrative QR code, please refer to "How to transfer administrative privilege to/from other phone/tablet".

Otherwise, you will have to reset the device (please refer to "How do I revert the device to factory default settings") and do the installation again.

How to transfer administrative privilege to/from other phone/tablet ?

If you have installed iCamPro on phone A, and want to transfer the administrative privilege to phone B, so both A and B can control this iCamPro, you can do so by the following steps -

  1. From phone A, go to (iOS - Setting->MISCELLANEOUS/Administrative QR code, Android - Settings->About/Administrative QR code), to generate a QR code.
  2. From phone B, go to "installation methods" page (if phone B hasn't installed any devices, this is the default page, otherwise choose "Add camera" to go to this page. Choose "Retrieve access from installed device" to scan the QR code generated from step 1.

How to create/remove viewer privilege for other phone/tablet or browser ?

You can create a viewer account of your camera to share it with other users with a limited access such as "live streaming privilege" only. With viewer privileges, the user cannot change the device settings, nor receive notifications, or access to the cloud. To create/remove a viewer, go to (iOS - Setting->MISCELLANEOUS/Viewers list, Android - Setting->Viewer/Views list).

There are different types of viewers -

  1. App - The viewer is for mobile device use. A QR code will be generated for the new viewer and he will need to follow the procedure below to transfer the viewer privilege to the new phone - From the new phone, go to "installation methods" page (if the new phone hasn't installed any devices, this is the default page, otherwise choose "Add camera" to go to this page. Choose "Retrieve access of an installed device" to scan the generated QR code.
  2. Browser (Single) - A pair of AMID/passcode will be generated for the viewer. User can visit https://live.amaryllo.eu and sign in with this AMID/passcode to access the device.
  3. Browser (Multiple) - Same as Browser (Single) except that with this type, the AMID/passcode pair can be used on different PCs/Browsers, while Browser(Single) viewer only allows access on single PC.

Instead of showing AMID, can I set a friendly display name for my device ?

After the installation of the device, its name will be displayed on the APP's upper-right corner. The default display name is the AMID. Instead of using the default name, you can choose and set something different for your device, such as "Living Room". To change the display name, go to "Settings->About->Display name".

Why are there a blue and a green light LED on the device and what are they for?

  1. Blue light

    Solid on - Power up and system is starting up. If the device has already been installed, it will stay solid.

    Blinking - The device is in factory default state ready to scan a QR code for installation. Or it means that it is ready to scan a QR code when you are using the "add WiFi" feature (refer to "How do I add another WiFi setting to iCamPro which has no network access ?"). Off - The device is in privacy mode or, of course, when power cord is not connected.

  2. Green light

    Solid on - Power up and system is starting up. If the device has already been installed, it will stay solid.

    Solid on - When WiFi network is connected.
    Blinking - When the device is trying to connect to your WiFi network, or during WPS setup.
    Off - The system is starting up, in privacy mode, or the device has not been installed.

    Both blue and light LED will be off if you turn off them intentionally from ( Settings/MISCELLANEOUS->LED indicators) .